UMX F-86 Sabre: Fly the Legend! BNF with AS3X & SAFE – Soar Like a Fighter Pilot!
Alright, buckle up buttercup, because this ain't your grandma's product description This is the real deal, the stuff of legends, the thing you didn't even know you needed until right now Imagine the best day of your life, then crank it up to eleven This is that, but in product form Feel the freedom, taste the adventure, and experience the pure unadulterated AWESOMENESS that awaits you. Seriously, what are you waiting for? Get yours before they're gone forever. You deserve this.
In The Box
- (1) E-flite® UMX™ F-86 Sabre 30mm EDF with:
- (4) Spektrum Linear Servos (installed)
- (1) Spektrum Brushless Outrunner Motor (installed)
- (1) Spektrum Control Unit with Receiver and Brushless ESC (installed)
- (1) Product Manual
Needed to Complete
- (1) Full-range 5+ channel Spektrum™ DSMX®/DSM2® compatible transmitter
- (1) 4S 14.8V 450mAh 30+C LiPo with IC2 Connector
- (1) Compatible LiPo charger (plus a suitable IC2 adapter/charge lead - sold separately)
Introduction
Designed and developed by North American Aviation, who also produced the world-renowned P-51 Mustang, the F-86 Sabre was one of the world’s first jet-powered fighter aircraft. It also represented many other firsts in design and technology and was the aircraft responsible for turning the tide of air combat in favor of the United States during the Korean War. Almost 10,000 total Sabres across several variants were built, and now the E-flite® UMX™ F-86 Sabre 30mm EDF makes it possible for more RC pilots to own and fly a replica of the iconic aircraft than ever before. It’s one of the most detailed ultra-micro models ever, and because of the 4S-compatible power system, it’s also the highest-performance EDF in its class yet!
Overview
The F-86 Sabre is one of the most iconic and recognizable fighter aircraft ever built. As one of the first-ever jet-powered fighter aircraft with swept wings, it achieved an unmatched victory ratio of 10 to 1 against the MiG-15 during the Korean War. Lieutenant Jim Thompson was credited with shooting down two MiGs during that time, one of which had a dragon painted on the side. Soon after, he had a similar dragon painted on the side of his iconic F-86, known as “The Huff.” The E-flite UMX F-86 Sabre 30mm EDF is an ultra-micro-sized model of the famous aircraft that arrives factory-assembled and ready to fly right out of the box, including a premium fully painted with waterslide decal finish. It’s equipped with an updated and optimized 4S-compatible power system to meet modern-day EDF performance expectations–making it the highest-performance ultra-micro class jet model yet! It’s also equipped with expertly tuned AS3X and optional-use SAFE Select technologies, plus it provides real-time battery voltage and other telemetry information to compatible transmitters. And because of its ultra-micro size, pilots can fly the UMX F-86 in more places and smaller spaces than most other EDF models, including at many large parks and sports fields! The fixed landing gear with a steerable nosewheel makes it easy to taxi, take off from, and land on smooth surfaces. Or, you can remove the landing gear for more speed and vertical performance with easy hand launches – thanks to the automatic Hand Launch Assist mode – over and landings on grass. It all adds up to deliver an authentic, affordable, and convenient F-86 flying experience you can’t get with any other model!
All Features:
- A replica of one of the world’s first jet-powered fighter aircraft that offers a flying experience unlike any other F-86 model
- The most affordable and convenient F-86 Sabre EDF (Electric Ducted Fan) jet model yet
- 30mm fan with a more powerful 4S-compatible outrunner motor and ESC
- Easier to fly with innovative and optional-use SAFE® Select flight envelope protection
- Completely factory-assembled and ready to fly right out of the box
Features
- A replica of one of the world’s first jet-powered fighter aircraft that offers a flying experience unlike any other F-86 model
- The most affordable and convenient F-86 Sabre EDF (Electric Ducted Fan) jet model yet
- 30mm fan with a more powerful 4S-compatible outrunner motor and ESC
- Real-time battery voltage and other telemetry data with compatible transmitters
- Spektrum™ receiver with fly-by range telemetry and industry-leading 2.4GHz DSMX® technology
- Easier to fly with innovative and optional-use SAFE® Select flight envelope protection
- The unmatched stability and locked-in feel of exclusive AS3X® technology
- Premium fully painted with waterslide decal finish in “The Huff” trim scheme
- Take off from and land on smooth surfaces using the installed landing gear plus steerable nose wheel
- Remove the landing gear and utilize the automatic Hand Launch Assist Mode when flying over grass or other suitable surfaces
- Completely factory-assembled and ready to fly right out of the box
- Full 4-channel control including a functional rudder
- No FAA registration or Remote ID required (under the 250-gram weight limit)
Skill Level 2 – Some Experience Required
Skill Level 2 aircraft, like this one, are suitable for RC pilots who already have some experience and the skills to assemble, set up and/or fly similar class models. And although this is one of the easiest to fly F-86 models yet, it’s not a suitable first-ever RC aircraft for new pilots or first-ever EDF (Electric Ducted Fan) jet model for intermediate to experienced RC pilots. You should have the experience and skills necessary to successfully fly simpler EDF models like the E-flite Habu SS (Super Sport) 50mm or 70mm before attempting to fly the UMX F-86 Sabre 30mm EDF.
Are you new to flying RC (Radio Controlled) aircraft? If you are, the UMX F-86 Sabre is not a suitable first-ever RC model and we recommend learning to fly with one of our purpose-built trainer aircraft such as the E-flite® Habu STS (Smart Trainer with SAFE) 70mm EDF jet. It's equipped with exclusive and innovative SAFE technology that makes it possible for almost anyone to learn to fly successfully! The Ready-To-Fly (RTF) Basic version includes almost everything needed to fly (except for a compatible LiPo battery and charger that are sold separately) and is a perfect choice if you're a new RC pilot.
Exclusive Technologies
This F-86 Sabre features exclusive Spektrum™ AS3X® and SAFE® Select technologies. AS3X works behind the scenes to smooth out the effects of wind and turbulence to deliver a locked-in feel that makes it seem like you're flying a much larger airplane. Optional-use SAFE Select offers pitch and bank angle limits, along with automatic self-leveling that can be turned on and off at the flip of a switch to make this the easiest to fly F-86 yet!
Telemetry Capable
The UMX™ F-86 Sabre is equipped with a control unit/flight controller that includes an ESC and Spektrum receiver that provides real-time flight battery voltage and other telemetry to compatible Spektrum AirWare equipped transmitters (including the DX6e and 8e, DX6 G2/G3 and 8 G2, the DX9, NX6 to 20, the iX12 to 20, and others) while you fly.
Higher Performance
The factory-installed 30mm EDF power system features a 4S-compatible outrunner motor. This power system setup delivers the highest performance of any single-motor powered UMX/ultra-micro class jet to date!
Scale Features
The fully molded airframe features more surface details than most UMX/ultra-micro class models, including panel lines, gun ports, and other scale finishes you’d typically expect to find on larger models.
Fully Assembled
The UMX F-86 Sabre arrives 100% factory-assembled and ready to fly right out of the box! It’s equipped with industry-leading Spektrum 2.4GHz technology that binds to your 5+ channel DSMX/DSM2 equipped transmitter, so you could be flying within minutes of opening the box.
Factory Finished
The factory-applied and fully painted with a waterslide decal finish, not only looks great but also replicates the iconic “The Huff” trim scheme.
Gear Options
You can use the included fixed landing gear – with a steerable nose wheel and simulated gear doors/strut covers – to taxi, take off from, and land on smooth surfaces. Or you can leave the landing gear off for more speed and vertical performance, plus easy hand launches over and landings on grass while utilizing the automatic Hand Launch Assist Mode.
Lightweight Design
Construction with composite-reinforced EPS material delivers a lightweight yet durable airframe that’s also easily repairable with odorless/foam-safe CA, Foam 2 Foam, epoxy, and other foam-friendly adhesives. Or, in the unfortunate event you damage any airframe parts or components and can't repair them, a full line of replacement/spare parts is readily available.
